Next up? The kitchen. I've never cut a counter top, but have watched enough youtoob videos to deem myself competent enough to try.
Taped and marked:
Success!
Inital mockup to see if things are gonna fit:
And, it does not. Top tip - Just because the countertop says it's 72", you'd best verify. This one is actually 72.5. The problem came in becuase I drilled the holes for the water and drain for the sink cabinet assuming the RH edge would be 6' from the RH wall. And I mounted the sink so it'd be centered over that cabinet. Since the countertop was 1/2" too long, it made the sink not line up. My options? Either cut 1/2" off the countertop or elongate the holes in the back of the cabinet and move it to the right 1/2". I went with the latter since there was still room for the fridge.
Everything's lined up and it fits. Still have to install the faucet and final plumbing.