CRF 450L/ RL Cheeseburgers Mods

[Nepa Cheeseburgers]

I’m going to skip some life stories
And do mods from day one of having a
CRF450L

BP
JD
Vortex
Clutch Hub/Bearing
Judder Spring
Headpipes
Cans ,L,X,Marrs and a couple other styles
Air Box
Gearing
And Riding it,

I will do my best to share my Marrs
Knowledge

Now to make folders of each ????

 

[Yinzer Moto]

 

[Navin]

Imposter test.

How long can a cheeseburger felled from the eternally greasy George Foreman grill, lay on the garage floor and still be safe to eat?

 

[ZoomerP]

Shop accidents are no joke.

 

[Nepa Cheeseburgers]

Imposter test.

How long can a cheeseburger felled from the eternally greasy George Foreman grill, lay on the garage floor and still be safe to eat?

As long as your hungry,
Rinse it off if dog don’t get it first !!

 

[Navin]

As long as your hungry,
Rinse it off if dog don’t get it first !!

Its yoo!

 

[300man]

Ah all is right in the worlds lol

 

[300man]

Reached out to NEPA to get one of his BM Baffles for my 21 450RL. Can't wait to get that baby and get it installed!

 

[Nepa Cheeseburgers]

Reached out to NEPA to get one of his BM Baffles for my 21 450RL. Can't wait to get that baby and get it installed!

I hope it arrives tomorrow, cuz post office was closed for GNCC/Daytona,,,
Monday,,

And it was 45 deg here today,
And warm gets Marrs moving ,
and I hope it rains like hell the next couple of warm days to clean sht and ice off dadirt
Not seen since early December,

I want to try the Vance & Hines mini can,
I did up, it’s cute
Like 300s BM no lol

But the way I did it and used the X Baffle mod in it,,,still need a rubber baby bumper under # plate

It should and would be quieter and flow better than a single pass Can

I’m sure it will work ,,,,
For something,
Prayers for warm weather I’m Jones ing
To ride

 

[Nepa Cheeseburgers]

Wear

I hope it arrives tomorrow, cuz post office was closed for GNCC/Daytona,,,
Monday,,

And it was 45 deg here today,
And warm gets Marrs moving ,
and I hope it rains like hell the next couple of warm days to clean sht and ice off dadirt
Not seen since early December,

I want to try the Vance & Hines mini can,
I did up, it’s cute
Like 300s BM no lol

But the way I did it and used the X Baffle mod in it,,,still need a rubber baby bumper under # plate

It should and would be quieter and flow better than a single pass Can

I’m sure it will work ,,,,
For something,
Prayers for warm weather I’m Jones ing
To ride

Weather is or should I say L is ready ,has a shot can and wants rode today!

Rain and 55 deg,on 2/22/22
Yeehaw 300,
BM should be there if you have tracking on BM
Stick it and did ya get the JD in yet ??

 

[300man]

YA bring on the warm weather!!!

No i didn't put in the JD and might not until getting back from the TAT if that becomes a reality. I am slow to make Mods to my bikes except for the tall guy stuff that I really need.

I also figure if doing the TAT not installing the JD is one less thing that can malfunction of cause a issue.

Still have the IMS tank and TM design works skid plate sitting in the boxes. But that's because I've been Freshening up the 300 with new top end, frame guards, and graphics.

Will check tracking today and head to the PO if it has arrived. Thanks NEPA!!

 

[300man]

Got the BM and it looks great, Thanks NEPA!! Just want to get a couple of rides in before installing it for a base line. this way I will really feel the difference!

Had some snow and sleet last night and the road crews were out...the roads were white with salt this morning...supposed to go to 65 on Sunday with some rain. Hope it washes the salt off the roads!

 

[Nepa Cheeseburgers]

Anyone need a “Wild Thing”

It has HP/TQ at same settings,
Sound bows not carry like other thumper cans,
Ya get close to someone, they pick head up , look at you and go back to there work,
We’re Marrs can ya just hear the knobbys
Go by,

Offer is for cheeseburgers, lol

 

[300man]

Well did a couple laps around my block today and snapped a picture while I was at it!
Sometimes you just have to ride!!

Have one of NEPAs gutted cans on the bike and will be putting in a BM (Baffle Mod.) that I just bought from NEPA as well!!

Gutted can (modified stock muffler) reduced heat, reduced weight and added some flow with a bit of a bump in mid to upper range roll on. Yet retained the stock quiet exhaust note that I really like and wanted to keep. BM mod will go in after a couple of rides then I will report back. Thanks NEPA! Boy I suddenly have a hankering for a cheeseburger!

 

[Nepa Cheeseburgers]

Air box lid mod,flow, more filter used and
Keeps water out !!!
Without the sound of a Quadrajet air cleaner flipped upside down!!!
As us old bastards kno !!!

 

[Nepa Cheeseburgers]

Last post was for Russians!!!!!

 

[Nepa Cheeseburgers]

BM mod,
My best brain fart ever !!!!!
9 hole
12 hole
And one with cat out west
But I did not like the last one ,
It’s to open,and no vortex effect !!!
Free HP

 

[Nepa Cheeseburgers]

Evans a caveman can du it lol

 

[Davethestick]

Great Thread! - Thanks for sharing

 

[Bitingdog]

Air box lid mod,flow, more filter used and
Keeps water out !!!
Without the sound of a Quadrajet air cleaner flipped upside down!!!
As us old bastards kno !!!

I remember flipping air cleaner lids on quadrajets. Sounded badass